Models Max. Feeding Size (mm) Capacity (t/h)

 Final Size mm
(Adjustment Type)

Motor Power (kW)
Dragon 11000 1100 x  900 mm 200 – 350 t/h 0 - 265 mm  200 Kw

Mobile Primary Crushing And Screening Plant,Dragon 11000

The Dragon 11000 primary crushing screening system is all collected in one platform and can be transported by a truck. The Dragon is specially designed by the R&D group to be installed within a short time. The work that the classical primary crusher can do can be done by itself. At present we are one of the most preferred machines in the world and Turkey market. They are the most suitable crushers for breaking hard materials such as basalt and granite, as well as materials from iron ore, chrome or quartz. 

Existing machinery and equipment in the system ; 

*Vibrating Feeder and Hopper 
The feeder system is operating with  2 vibromotors ( Italian Brand Oli ) which leads to  low maintenance and trouble-free operations.
The feeder  is suitable for feeding with Excavator and Loader and can be feed as well  with truck with an additional hopper.
All wear points in the feeder and in the hopper are protected by replaceable wear shields. At the points where wear may occur, wear arms are bolted and can be easily replaced.
The additional hopper can be opened and closed by the hydraulic system. This allows easy assembly and disassembly.
The feeding tray has a screening system. In this screening  system there is a zig zag type grill system which can eliminate the large materials easily .
By-pass conveyor allows sifted and thin materials  to be stocked in the stock area , or it can send this materials directly  to the main band by a clapper groove. Thanks to this clapper groove, the mine can be transported to the stock area without entering the stone crusher, or the main band can be feed. This is a factor that increases the capacity. 

*DRAGON 11000 JAW CRUSHER 

Jaw Crusher : 1100 X 900  mm
Crusher Type : Primary 
Motor power : 132 kw
There is setting mechanism which leads to easy configuration.
The rotors are specially manufactured and have replaceable wear shields in their wear exposed parts.

* Main Conveyor Belt System 
It is 650mm wide and is of palette type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. Side scraper system is available to prevent outflow. 

* Grizzly Vibrating Screen System
Screen Size :1500 X 3500 mm
Motor  Power: 15 kw
Three different sizes of screening.
Special type bearing suitable for vibration.

* Under-Sieve Stock Conveyor Belt System 
 It is 1000 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during crushing. Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Stock Conveyor Belt System 
1000 mm wide folding type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during crushing.
Foldable with hydraulic piston for easy assembly and disassembly of the system.

* By-Pass Conveyor Belt System 
It is 500 mm wide.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Foldable with hydraulic piston for easy installation and disassembly of the system
Side scraper system is available to prevent outflow.

* Mobile Chassis System
It is equipped with 2 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. There are 6 hydraulic feet mechanisms in the hydraulic system. These feet are strengthened by the fixed feet after they are locked.
Hydraulic Power System thanks to 125 litre, all pistons are controlled by special control system.

* Panel and Control System 
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water. Although the used panel is insulated against dust and water, Dragon Machine contains a system that can remove our panel systems from the main scale by about 8 metres. 

* All functions can be controlled with Remote Control (Radio Control System).

- The dust suspension control system prevents dusting by conveying high pressure water to the conveyor to spray the dust.
- Electric Motors IE2 is a highly efficient type.
- Conveyor belt systems EP 125 and EP 160 are suitable for long use with 10 and 14 mm thick cortex.
- Bearings are SKF or equivalent.

Total Motor Power: 166 kw
Maximum Feeding Size: 1100 X 900  mm
Ideal Feeding Size: 0 - 800 mm
Final Size: Can be set to give a final product of 0 - 265 mm or larger. 
Capacity is variable according to the material feed and final product dimensions to be broken and it is 200-350  ton capacity.

Additional Standard Features in the System
- Extra hopper for truck feeding.
- By-pass system and By-pass conveyor.
- Dust Suspension Control System.

Optional Features
- Magnetic Magnet Conveyor Belt (Optional)
- The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)

Weight : 67 tons

All of our products are CE certified.

JAW CRUSHER CLOSED SIDE SETTING CAPACITY ( T/H )

Jaw Crusher 1100 x 900
Crusher Closed Side Setting (mm) Output Capacity (t/h)
20  
25  
30  
40  
50  
60  
70  
80  
90 90 - 115
100 100 - 125
125 140 - 175
150 175 - 220
175 210 - 265
200 250 - 310
250 305 - 385

** All our products are CE certified by the European Union